Generally the Micro sights are delivered with an integrated standard mount, and in this case the sight is ready to be mounted on the weapon rail.
In case the standard mount is not already attached to the sight, then the following applies:
For Micro H-1/T-1: Use locking glue of type Loctite on the 4 screws of the mount when tightening the mount to the sight.
For Micro H-2/T-2: Do NOT use locking glue on the 4 screws of the mount when tightening the mount to the sight.
For detailed information about the mounting procedure, please read chapter V in the user’s manuals of the Micro H-1/T-1 and Micro H-2/T-2 sights.
Aimpoint can offer the 11mm Dovetail mount and/or Micro mount for semi-automatic shotguns. There are other mount manufacturers that make the most commonly used mounts for the Micro product line.
Aimpoint® sights can be mounted on virtually any firearm. For the models which don't have an incorporated mount, you will need 1 or 2 rings to perform the mounting on the weapon. The rings have a diameter of 30mm or 34 mm. We recommend a gunsmith to mount the sight on the weapon if the weapon does not already carry a Weaver or Picatinny rail.
If the rail is not mounted properly, you will encounter zeroing problems. Please check the following page for further information about the subject: Mounting the sight.
Only products currently manufactured and older 7000 series Aimpoint® sights should be mounted on this type of airgun. Older products should not be used.
To see our discountinued products, please go to Discontinued sights.